Intelligent Addressable Fire Detectors

Product Details:

IQ8Quad Intelligent Addressable Smoke Detector: Automatic heat detector with a single thermistor to sense the air temperature around the detector. Fast semiconductor sensor guarantees reliable detection of fires with strong heat generation. Ideal for sensing in environments that are dirty or smoky under normal conditions, as well it is unaffected by wind or atmospheric pressure. Intelligent fire detector with decentralized intelligence, automatic function self-test, CPU failure mode, alarm and operating data memory, alarm indicator, soft-addressing and operating indication.

The detector is provided with an integrated isolator. A remote indicator can be connected.

Product Details:

Automatic heat detector with a single thermistor to sense the air temperature around the detector. Fast semiconductor sensor guarantees reliable detection of fires with strong heat generation. Ideal for sensing in environments that are dirty or smoky under normal conditions, as well it is unaffected by wind or atmospheric pressure. Intelligent fire detector with decentralized intelligence, automatic function self-test, CPU failure mode, alarm and operating data memory, alarm indicator, soft-addressing and operating indication.

The detector is provided with an integrated isolator. A remote indicator can be connected.

• Part-No.: 802171 
• Approval: VdS, BOSEC

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Optical smoke detector which works using the light scatter principle to guarantee safe and early detection of fire. Responds well to slow-burning, smouldering fires. Intelligent fire detector with decentralized intelligence, automatic function self-test, CPU failure mode, alarm and operating data memory, alarm indicator, soft-addressing and operating indication. The detector is provided with an integrated isolator. A remote indicator can be connected.

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Multisensor fire detector with integrated optical sensor and heat sensor which give both a combined signal as well as a separate heat signal for improved false alarm management, with time-controlled signal analysis and weighted data combination of both detector functions for detecting smoldering fires and fires with extreme heat generation. Intelligent detector with decentralized intelligence, self-function test, CPU redundancy mode, automatic adaptation to the environments, alarm and operating data storage, alarm indication and soft addressing.

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Multisensor fire detector with integrated optical sensor and heat sensor with enhanced false alarm management. The optical measurement chamber is provided with a patented developed sensor technology using a high-sensitive blue LED (instead of the commonly used red LED in Optical smoke detectors), enabling the detection of open fires, smoldering fires and fires with high heat generation. Especially for open fires, the classical ionization technology implemented in ionization detectors is replaced by the unique detection technology, unlike ionization detectors, this sensor works without a radioactive element which causes problems at the time of refuse disposal. The detector is capable of identifying the TF1 and TF6 test fires described in the EN 54-9:1982 specification. Well suited for sensitive environment, detection of invisible up to large aerosols.

The OTblue multisensor is an intelligent detector with time-related signal analysis, signal correlation of the sensor data, decentralized intelligence, automatic function self-test, CPU failure mode, automatic adaptation to environmental conditions, alarm and operating data memory, alarm indicator and soft-addressing.

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Automatic heat detector with a single thermistor to sense the air temperature around the detector. Fast semiconductor sensor guarantees reliable detection of fires with rapidly rising temperatures and integrated fixed temperature function for the detection of fires with slowly rising temperatures. Ideal for sensing in environments that are dirty or smoky under normal conditions, as well it is unaffected by wind or atmospheric pressure. Intelligent fire detector with decentralized intelligence, automatic function self-test, CPU failure mode, alarm and operating data memory, alarm indicator, soft-addressing and operating indication.

The detector is provided with an integrated isolator. A remote indicator can be connected.

• Part-No.: 802271 
• Approval: VdS, BOSEC

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Multisensor fire detector using patented dual angle optical scatter as well as additional heat detector sensor evaluation to guarantee the detection of different types of fire from smoldering fires to open fires with constant sensitivity level. Smoke sensor signal identification to ensure smoke classification and reduction of false alarms caused by interferences, for instance, water vapor or dust. Used when early and reliable fire detection is requested. Because of its excellent detection characteristics and enhanced false alarm management, the detector is also able to identify the standardized TF1 and TF6 test fires. The O²T multisensor fire detector is also suitable for applications with higher temperatures of up to +65 °C. The detector is provided with an integrated isolator. A remote indicator can be connected.

With VdS approved parameter settings for special applications:

- Water/oil/haze

- Garage

- Hall

- Clean room

- High application temperature (~ 80°C)

- Hotel room

- User defined

Part-No.: 802374 
Approval: VdS, BOSEC

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Multisensor fire detector with integrated smoke detector, heat detector and gas sensor (CO) with enhanced false alarm management, for preventive and early detection of deep-seated smouldering fires which give a lot of CO as well as flaming fires through combined evaluation of scattered light, temperature and gas. An alarm is actuated at carbon monoxide (CO) concentration levels that are life-threatening for humans. Less susceptible to false alarms caused by dust, as well earliest and reliable detection of fire development due to the additional detection of CO. Also a Technical Alarm (TAL) can be programmed with the flexible programmable CO threshold up to 150 ppm. The detector is provided with an integrated isolator. A remote indicator can be connected.

Part-No.: 802473 
Approval: VdS

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 

Product Details:

Scatter smoke detector for safe and early detection of smoldering fires with light smoke generation. Intelligent detector with decentralized intelligence, automatic function self-test, CPU failure mode, alarm and operating data memory, alarm indicator, soft-addressing and operating indication. The detector is provided with a loop isolator. Along with smoke detection components, the detector is provided with a built-in sounder.

• Part-No.: 802382 
• Approval: VdS

Detection

• The reliable sensor principle for consistent response performance at the highest level of security against false alarms

Sounder

• Loop powered - no need for external power supply
• Individual control of the sounder
• Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools (school bell) etc.
• Soft start option, ideal for hospitals and nursing homes
• No additional short address
• Automatic synchronization of various IQ8Quad alarm signaling devices
• Maximum sound level: 92 dB (A) at 1 m
• Maximum sound pressure can be set
• Multiple signal components can be combined to one signal template
• Signal template and repetition rates can be set
• Up to 26 different languages are available
• 20 different signal tones, incl. DIN-tone
• Low power consumption

Common technical data: 

• Operating voltage  8 ... 42 V DC 
• Quiescent current @ 19 V DC  40 μA 
• Quiescent current @ FACP battery  approx. 220 μA 
• Alarm current w/o communication curtain  18 mA 
• Area to be monitored  30 m² 
• Height to be monitored  7,5 m 
• Air velocity  0 m/s ... 25,4 m/s 
• Application temperature  -20 to 50 Degree Celsius

 
 

Product Details:

Scattered-light smoke detector for reliable early recognition of fires. Responds well to slow-burning, smouldering fires. Intelligent fire detector with decentralized intelligence, automatic function self-test, emergency mode, storage of alarm and operating data, alarm display. Soft addressing and separate operational display is only possible when operating an esserbus / esserbus-PLus IQ8Quad detector without loop isolator, especially for usage in explosion zones. Operation with individual addressing at Ex barrier Part No. 804744 and as standard detector at Ex barrier Part No. 764744.

• Part-No.: 803371.EX 
• Approval: VdS, ATEX

Data according to ATEX: 

• Max. Input Voltage (Ui)  21 V DC 
• Max. Input current (Ii)  252 mA 
• Max. Output current (Io)  10 mA 
• Max. internal capacity (Ci)  1 nF 
• Ambient temperature (Ta)  -20 °C ... 70 °C 
• EC-type examination certificate  TÜV 09 ATEX 554910 
• Ex-category  II 2G (with Ex barrier Part No. 804744 or 764744) 
• Ex. protection  Ex ib IIC T4 Gb 

Common technical data: 

1. Operating voltage  8 ... 42 V DC 
2. Quiescent current @ 19 V DC  40 μA 
3. Alarm current @ 9 V DC  18 mA 
4. Area to be monitored  30 m² 
5. Height to be monitored  7,5 m 
6. Application temperature  -20 to 50 Degree Celsius
7. Storage temperature  -25 to 75 Degree Celsius

Product Details:

Automatic heat detector with a single thermistor to sense the air temperature around the detector. The fast semiconductor sensor for the reliable recognition of fires with a single thermistor to sense the air temperature around the detector. The fast semiconductor quick rate of temperature rise as well as integrated fixed temperature heat function for the recognition of fires with slow temperature rise. Ideal for sensing in environments that are dirty or smoky under normal conditions, as well it is unaffected by wind or atmospheric pressure.

Intelligent fire detector with decentralized intelligence, automatic function self-test, emergency mode, storage of alarm and operating data, alarm display. Soft addressing and separate operational display is only possible when operating an esserbus / esserbus-PLus IQ8Quad detector without loop isolator, especially for usage in explosion zones. Operation with individual addressing at Ex barrier Part No. 804744 and as standard detector at Ex barrier Part No. 764744.

• Part-No.: 803271.EX 
• Approval: VdS, ATEX

Data according to ATEX: 

• Max. Input Voltage (Ui)  21 V DC 
• Max. Input current (Ii)  252 mA 
• Max. Output current (Io)  10 mA 
• Max. internal capacity (Ci)  1 nF 
• Ambient temperature (Ta)  -20 °C ... 70 °C 
• EC-type examination certificate  TÜV 09 ATEX 554910 
• Ex-category  II 2G (with Ex barrier Part No. 804744 or 764744) 
• Ex. protection  Ex ib IIC T4 Gb 

Common technical data: 

1. Operating voltage  8 ... 42 V DC 
2. Quiescent current @ 19 V DC  40 μA 
3. Alarm current @ 9 V DC  18 mA 
4. Area to be monitored  30 m² 
5. Height to be monitored  7,5 m 
6. Application temperature  -20 to 50 Degree Celsius
7. Storage temperature  -25 to 75 Degree Celsius

Product Details:

Intelligent detector with two integrated optical smoke sensors with different scattered-light angles as well as additional heat detector sensor evaluation for the recognition of smoldering fires up to open fires with uniform characteristics. Comparison of the heat sensor signals for smoke classification and reduction of false alarms by interferences, e.g. from steam or dust. Due to its excellent detection characteristics, and enhanced false alarm management, the detector is also able to recognize TF1 and TF6 test fires, described in the standards. The O²T intelligent detector is also suitable for a higher operating temperature of up to +65 °C. Used when early and reliable fire detection is requested. Intelligent fire detector with decentralized intelligence, automatic function self-test, emergency mode, storage of alarm and operating data, alarm display. Soft addressing and separate operational display is only possible when operating an esserbus / esserbus-PLus IQ8Quad detector without loop isolator, especially for usage in explosion zones. Operation with individual addressing at Ex barrier Part No. 804744 and as standard detector at Ex barrier Part No. 764744. Consider that the change of parameter settings for environmental adaption is reserved to the Non-Ex automatic detectors.

• Part-No.: 803374.EX 
• Approval: VdS, ATEX

Data according to ATEX: 

• Max. Input Voltage (Ui)  21 V DC 
• Max. Input current (Ii)  252 mA 
• Max. Output current (Io)  10 mA 
• Max. internal capacity (Ci)  1 nF 
• Ambient temperature (Ta)  -20 °C ... 70 °C 
• EC-type examination certificate  TÜV 09 ATEX 554910 
• Ex-category  II 2G (with Ex barrier Part No. 804744 or 764744) 
• Ex. protection  Ex ib IIC T4 Gb 

Common technical data: 

1. Operating voltage  8 ... 42 V DC 
2. Quiescent current @ 19 V DC  40 μA 
3. Alarm current @ 9 V DC  18 mA 
4. Area to be monitored  30 m² 
5. Height to be monitored  7,5 m 
6. Application temperature  -20 to 50 Degree Celsius
7. Storage temperature  -25 to 75 Degree Celsius

Product Details:

The Pyrox Smoke Detectors have been devised with resistance that disregards the false alarms that are caused by non-combustion particles like dust and steam. They use a different value algorithm to identify smoke, and hence it is responsive to light-coloured and heavy-coloured smoke. Designed well with milky white colour that agrees with every interior of a house/office. Detectors are made in India and are devised by the Victofire engineers’ team.
The Pyrox Smoke Detectors has two variants, namely addressable and conventional. The detectors consume low power on their functioning. Detectors are connected to modules through an addressable or conventional interface.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 1 week
• Packaging Details: Box