- Home
- ยป
- Our Products
- »
- Power Supply Systems
Power Supply Systems
DB2 External Power Supply
Product Brochure
Brand | Esser |
Output Voltage | 20 to 29 V DC |
Weight | 9 kg |
Dimension | W: 417 mm H: 490 mm D: 206 mm |
Color | Gray |
Frequency | 50 to 60 Hz |
Housing | Stainless Steel |
Output Current | Max. 4 A |
Rated Voltage | 230 V AC |
Type of Protection | IP 30 |
The external power supply unit DB-2, built into a powder-coated metal housing, offers space for up to two 12 V / 45 Ah batteries. A connection to the fire alarm control panels IQ8Control and FlexES Control can be made directly via the optional adapter board (part no. HLSPS-ADPTR) with an esserbus® alarm tranponder (part no. 808623). Alternatively, a relay output with floating changeover contact is available for the transmission of faults (mains, battery and collective faults as well as earth fault). DB-2 offers external LED display for operation and collective fault in the lockable front door, internal LEDs for detailed detection of emergency power operation, individual monitoring of battery failure, ground fault, deep battery discharge as well as system errors and mains failure. The settings for battery capacities and combinations are made via DIP switches on the base board of the DB-2.
- Part-No.: HLSPS-DB2
- Approval: VdS
- Battery Capacity: 7 Ah,12 Ah,17 Ah, 26 Ah,38 Ah,45 Ah
Features
- Modular structure for stand-alone or esserbus operation
- 2 inputs for monitoring external facilities
- Selection of the batteries to be monitored using DIP switches
- Optional connection in the esserbus via adapter board with alarm transponder
- Simple status analysis via LED displays on the base board
FAAST Series External Power Supply Unit
Product Brochure
Weight | 6.2 kg |
Dimension | W:400 mm H: 420 mm D: 80 mm |
Color | Black |
Contact Load Relay | Max. 60 V/100 mA |
Air Humidity | < 95 % |
Output Current | 5 A |
Type of Protection | IP 30 |
Housing | Sheet Steel |
Battery Capacity . | Max 38 Ah @ 24 V DC |
External power supply in a compact metal housing for holding up to two 12 V / 17 Ah batteries for use in fire and voice alarm systems. Up to two 12 V / 38 Ah can be connected and charged via the supplied battery housing. The power supply allows an uninterruptible power supply.
Two potential-free relay outputs are available for the transmission of faults (common fault, battery fault). External LED display for operation and common fault on the front door.
- Part-No.: F-PSU-2405
- Approval: VdS
Features
- Two potential-free relay outputs
- Single monitoring of the batteries for emergency power supply
- Compliant with EN 54-4 (A2)
12 V DC/DC Converter Output Voltage
Product Brochure
Output Voltage | 12 V DC +- 10 % |
Brand | Esser |
Weight | 70 g |
Operating Voltage | 10 to 28 V DC |
Output Current | Max. 800 mA |
Dimensions | W: 65 mm H: 72 mm D: 20 mm |
Protection | IP 40 |
Air Humidity | < 95 % |
Country of Origin | Made in India |
The converter provides a galvanically isolated 12 V power supply for a detector for special applications. The input voltage is 12 V, and it is supplied from the fire alarm control panel or from an external PSU. The module can be integrated into the 120240, 788600, 788601, 788603.10, 788650.10, or 788651.10 enclosures.
When planning the project, please pay attention to primary (12 V) current drain in case of a mains failure.
- Part-No.: 781336
- Approval: VdS
Features
- Galvanic isolation of DC voltage potentials
- Voltage interface, for instance for 12 V DC operation of couplers in an 8010 Series 3 extinguishing system.
- Connecting terminals up to 1.5 mm²
- short-circuit proof