Suppression Release Panel & System

Loop Versions: 2loops; 4loops; 8loops;10 loops
Number of Devices per Loop: 254
10 Conventional Sounder Outputs
Loop Communication Protocols Supported: Sensortec AS -NITTAN
Power Supply1: Input: 230VAC +10% -15%, 50Hz; Output:12VDC, 5A;5VDC, 5A.
Contact No:-

 

FM-200™ suppresses fire by disrupting the fire triangle. The fire triangle is made up of heat, oxygen, and a fuel source, and by removing one of these elements, the fire is extinguished. FM-200™ removes the heat or free radicals, which interferes with the fire triangle's chemical reaction to extinguish the fire. Clean agent fire suppression systems, like ones using FM-200™, can achieve fire extinguishing concentrations in 10 seconds or less.

How does FM-200™ work?
FM-200™ suppresses fire by disrupting the fire triangle. The fire triangle is made up of heat, oxygen, and a fuel source, and by removing one of these elements, the fire is extinguished. FM-200™ removes the heat or free radicals, which interferes with the fire triangle's chemical reaction to extinguish the fire. Clean agent fire suppression systems, like ones using FM-200™, can achieve fire extinguishing concentrations in 10 seconds or less.

FM-200™ advantages:

• FM-200™ is a clean agent that is safe around people; therefore, FM-200™ fire suppression systems are safe to install in occupied spaces.
• When an FM-200™ fire suppression system activates to put out a fire, no residue is left behind, and it is safe for equipment, electronics, and machinery.
• Compared to other clean agents like Novec 1230, FM-200™ is a slightly more cost-effective option.
• Because of the small amount of FM-200™ required to suppress a fire, smaller or fewer cylinders are needed when compared to other agents like Novec 1230.

The Simplex 4004R is a two-hazard releasing system that incorporates big-panel features into a small and cost-effective package. Its dual hazards can be programmed to provide an agent release for one hazard and preaction or deluge for the other, giving a high degree of flexibility and protection.  With the early detection capability of the agent release hazard, the fire should be extinguished before the preaction or deluge system is activated.      Highlights: Fire alarm control panel designed specifically for suppression release operation -   4004R panel is purpose built suppression release panel whose features include:

•  
  • Four initiating device circuits (IDCs)
  • Two notification appliance circuits (NACs)
  • Two releasing appliance circuits (RACs)
  • Two special purpose monitor inputs (SPMs) that accept manual release request and manual abort request for Agent Release systems, and waterflow and supervisory for Preaction or Deluge systems
  • Three auxiliary relays with selectable functions

 

Suppression release operation - Supported release modes include: 

•  
  • Automatic extinguishing release
  • Deluge and preaction sprinkler system release
  • Dual or single hazard area protection
  • Combined agent release and preaction operation

 

Audible Escalation of Events -  Stage 1 activates Temporal or 20 bpm March Time pattern; Stage 2 activates 120 bpm March Time pattern to indicate release timer active; Release activates On Steady to indicate release timer expired and actuator is activated.
Event Log - A 50-point historical log allows you to investigate the cause of a release after the event.
Flexible Programming - The 4004R can be programmed from the ront panel or from a PC.