Sunrise Fire Private Limited

• Addressable, completely bus supplied and short circuit / open circuit resilient combined fire alarm sounder and Visual Alarm Device (VAD) in compliance with EN 54-3 & EN 54-23 with integrated signaling tones and red light flash for acoustic and optical alarm signaling.
• With up to 20 different programmable signaling tones including DIN tone in accordance with DIN 33404 Part 3.
• The volume can be set to 8 different levels.
• The optical signaling device is suitable for square signal ranges W-2.4-5 to W-3.6-8.
• The optical signal range is adjustable in 6 sizes via tools 8000.
• Signaling device with flat base, suitable for wall mounting.
• Optionally, IP base Part No. 806202 with side cable entry and weatherproof protection can be installed.

• Completely bus supplied alarm device

• Powered loop compatible
• Low power consumption
• Up to 21 alarm devices for each powered loop
• Each alarm device has built-in isolator
• Synchronous trigger

• EN 54-23 compliant
• W category
• Signal range up to 8.0 m room width for wall mounting
• Room size configurable via tools 8000

• EN 54-3 compliant
• High acoustic pressure
• Volume programmable in 8 steps via tools 8000
• 20 different signaling tones, including DIN tone

Details:

Volume of up to 101.3 dB(A)

Maximum current consumption of less than 4.05 mA

Up to 100 sounders per LSN loop

Immediate synchronization

32 different tone types can be selected (incl. DIN tone)

Specifications:
Colorred, similar to RAL 3001 white, similar to RAL 9010Without packaging250 gWith packaging300 gPermissible operating temperature-10°C to +55°C (-25 °C to +70 °C)*Permissible storage temperature-25 °C to +85 °CProtection class as per EN 60529IP 21 C (IP 42 *)Sound pressure level at a distance of 1 mmax. 101.3 dB(A)Frequency range440 Hz up to 2,90 kHz

Optical signaling device compliant with EN 54-23 for wall and ceiling mounting with red lamp color and flat base. The signaling device is suitable for square signal ranges W-2.4-6.7 and cylindrical signal ranges C-3-9.4 / C-6-8.2.

To help define your conventional Visual Alarm Devices (VADs) requirements in line with the EN54-23 standard, we have developed an easy to use online guide. Simply enter the room dimensions and ambient light conditions and the guide will help your device 

Features:

• EN 54-23 compliant
• C & W category
• Synchronous flash trigger
• Up to 6.2 m room width for wall mounting
• Up to 9.4 m room diameter for ceiling mounting

Available Models:

• CWST-WW-SS
• CWST-WA-S7

Sounder acc. EN 54-3 with 64 selectable tones and three independently controllable alarm levels. The volume can be adjusted in 20 dB steps by potentiometer. The configuration takes place via a 6-way DIP switch.

• 119 dBA in 1 m with DIN sound
• 64 tones
• 20 dBA volume control
• 3 remotely switchable alarm levels
• Adjustable volume
• Wall and ceiling mounting
• High protection class
• Ideal for industrial applications

• Volume up to 112 dB(A)
• Can be used in adverse environmental conditions
• For 12 V DC and 24 V DC
• Reverse polarity protection
• Available for surface and flush-mounted cable feed

Detector Base Sounder designed and approved to EN 54-3 for mounting under detector base with relay output or control by Alarm Transponder. Three selectable tones, as well as maximum volume in the switch base adjustable.

Size and mounting are compatible with IQ8Quad detector base.

The conventional signaling device is especially suitable for hazardous industrial areas zone 2 and 22). The robust aluminum die-cast housing is resistant to chemicals and environmental influences. The DS10 complies with the technical requirements of DIN 33404 - 3 "hazard signals for workplaces".

• 9 tone sequences can be programmed:
• Continuous tone
• Alternating tone
• Intermittent tone
• Siren
• Fire alarm (different national regulations taken into account)

The conventional ex sounder is especially suitable for application in hazardous areas at industrial workplaces category 2G or 3G (formerly zones 1 and 2) and complies with the technical requirements of DIN 33404 - 3. The robust aluminum die-cast housing is resistant to chemicals and environmental factors.

• 32 tone sequences can be programmed:
• Quartz controlled sound synchronization
• ATEX approved
• LM6 aluminum die-cast housing
• Self-extinguishing aluminum cone, similar to UL 94 VO